Відео

That Palmetto Pool Base is terrible to trowel. The more you work it the more creamy it gets . Have to go over it and over it. Whitmore pool base or A-Tops is the way to go !!

Is not 8' deep?

can I glue the old vinyl liner glue to metal panels instead of foam sheet? Also I painted the metal panel over some rust?

can I glue the old vinyl liner to grout floor after patching grout floor?

So you’re talking to the end of the video and you’re standing in the shallow end I see wrinkles all over by your feet. Is that OK?

Hubby built one like this. Pro grade actually. He got only one help from our handyman who remodelled our kitchen. Took them 3 weeks to finish which he said would've been done in a week or two with more men helping him...😂

We renovated a disaster of a pool when we moved into our house. Liner broken, bottom needed to be completely redone. I love the pictures we took of my kids holding huge bullfrogs we pulled out of the bottom. It's so exciting when it starts looking like a pool and the water starts going in!

How long did it take?

You didn’t show doing the drain

Can you connect a hose for water to come out from the slide since my pool is already built.?

Ok ok. Last comment. DONT EVER HIRE THESE PEOPLE TO DO YOUR LINER! wtf. Look at all the wrinkles. Shitty work by shitty company. Yall make the rest of us look bad. Smh

Step 4 is wrong. Open liner in pool where you know it’s clean of debris. Their boots are leaving little bits of stuff that could puncture your new liner.

Step 1 is wrong. Sweeping does not get everything up. Shop vac the pool floor. After all other work is done right before you install liner.

Good tutorial! Burgers came out great!

What is the tool used to measure the depth during excavation? He called it a transit but it’s not like any transit I’ve ever seen.

How much installed?

How much sand for the dubai 30'? And how many legs on it?

Is it pool krete specifically that mixes so well and buttery looking? The mix looks a lot better than most other vermiculite brands I've seen.

How deep is the deep end?

Good video but lol at pretending to get the wrinkle out at 18:10

What kind of warranty is on the bottom rails? I just wonder the average lifetime for a chlorine pool.

This one still the best video for liner replacement on UA-cam! Thank you guys!

Can you install this to a trex deck

DO the stones round the outside give it a degree of earthquake proofing or at least ground shifting?

😮

Do you have any videos of how to install the newly designed turnbuckles and deck braces?

I ordered a kit from this company in 2004. I dug the hole(Kubota tractor) and installed the panels and all plumbing by myself. Hired a pool guy to carve out the final few inches of dirt and then trowel the cement bottom. Total cost for electric, plumbing concrete and decking was under 10K. We sold the home in 2010 and the owners now are still enjoying the pool after a few liner replacements over the years.

Quick question, when plumbing the returns do they connect with threaded pipe and dough?

You guys did not install returns? I know its not required but does it not help with bottom cleaning?

What’s the bounciest option you can get for a residential pool?

No issues backfilling the semi inground all the way to the top? Thanks

Oh got its sh*t as f**k

Check out or D.I.Y. pools and pool accessories @ poolwarehouse.com

Beautiful

Check us out @ www.poolwarehouse.com/

Check us out @ www.poolwarehouse.com

Why aren't you using some kind of rebar in that cement?

Build your Summer Oasis at: Check us out at: www.poolwarehouse.com/inground-pool-kits/

That liner looks wicked thin, what gage is it?

Check out this table and many more at: www.poolwarehouse.com/product-category/outdoor-living/indoor-living/game-tables/ #poolwarehouse #diy #outdoorliving #instagood #styleinspiration

Check the X2 out at: www.poolwarehouse.com/shop/global-pool-products-dual-post-basketball-set/

Can I use it in freezing conditions in my garage? I live in Indiana with an uninsulated garage

My friends this is the laser age, use a laser measuring device

Built these pools in Spokane WA. But it was all thick industrial plastic walls and had close to 24 wall supports to concrete over. Had to build a 60 2×4 spider in the hole to perfect the wall to a string line before it was poured. I would not use this cracker jack garbage. Lifetime pools Spokane site has pics of proper pool construction

Does this slide need to be grounded? I don't see any metal parts except the screws that attach to the concrete.

HEAVY PACKAGE! SOLID TABLE! Having a good time with this table so far. Fun for the whole family. The multi purpose, back to a big table when not in use is the best part. Perfect 👌🏽

This is very cool. How large is the pool table? is it a standard size pool table or smaller?

Under the felt is aluminum or wood ?

Y yall acting like yall operate those tractors or work like a man Both of yall have soft girly hands!

The best most informative video. We loved you're new socks😂